WALL GUARDS:
Sculpted Wall Guards
Flat Wall Guards
Accent Rails
Crash Rails
Heavy Duty Wall Guards

Heavy-Duty Wall Guard Profiles with end caps
Available in a variety of materials, Wallguard.Com heavy-duty wall guards/bumpers with integrated end caps offer a finished appearance and heightened end-impact protection for service areas, freight corridors and parking garages.

2200 Heavy-Duty Wall Guard
Rectangular profile provides maximum "face" for varying height impacts

• Used extensively in parking garages and building service areas
• Can be wrapped around cylindrical columns of 18" diameter or greater
• Features continuous grooves for simplified on-site drilling
• 1 1/2"D x 8"H
• Maximum length: 12 ft.
• EPDM Rubber, black

2205 Heavy-Duty Wall Guard
Used in similar applications as 2200 Heavy-Duty Wall Guard but features 9" height for maximum surface protection

• Popular chamfered profile for added safety and aesthetics
• Excellent for vehicle protection on forklifts, etc.
• Features a single, continous groove for simplified on-site drilling
• 2"D x 9"H
• Maximum length: 12 ft.
• EPDM Rubber, black

2210 Heavy-Duty Wall Guard
Features solid block construction for maximum impact resistance and chamfered edges for safety

• Two sizes available:
  • 2 1/8"D x 5"H 2210
  • 3 ½"D x 4"H 2210.1
• Minimal deflection upon impact
• Impact level: very high
• Maximum length: 12 ft.
• EPDM Rubber, black

2215 Heavy-Duty Wall Guard
Urethane wall guard

• 1 1/4"D x 8"H
• Standard Lengths: 10 ft.
• Non-marking
• May be installed either vertically or horizontally
• Available in charcoal only
• Matching end caps and outside corners

2220 Heavy-Duty Wall Guard
EPDM rubber wall guard mounted on aluminum retainer

• 2-1/4" high
• Easily installed with no visible hardware
• Retainer provides greater impact protection
• Black only
• Matching urethane end caps and outside corners

2225 Heavy-Duty Wall Guard
Urethane wall guard with aluminum retainer

• 1 1/2"D x 4"H
• Standard Lengths: 8 ft.
• Black only

• Matching urethane end caps and outside corners

2230 Heavy-Duty Wall Guard
Extruded natural rubber wall guard with single bulb rail

• 3"D x 5"H
• Standard Lengths: 10 ft.
• Designed for maximum roll action
• Available in black, tan, gray
• Overlapping urethane end caps available in black only

2235 Heavy-Duty Wall Guard
Marine fenders

• Two styles available:
  • 1 5/16"D x 2¾"D single-bulb rail 2235
  • 1 3/16"D x 4 7/16"H double Bulb 2235.1
• Standard Lengths: 12 ft.
• Available in black, tan, brown, gray, white, safety yellow
• Urethane end cap in black only

2240 Heavy-Duty Wall Guard
Wing-type bumpers combine the impact absorption of a cylindrical design with the ease of wing mounted installation

• Available in three sizes:
  • 2"D x 6"H - 2240
  • 2 1/2"D x 3 7/8"H - 2240.1
  • 3"D x 6"H 2240.2
• Typical drilling is 6" from either end, top and bottom, and 18" O.C., staggered
• Maximum Length: 10 ft.
• EPDM rubber, black

2245 Heavy-Duty Wall Guard
U-shaped bumpers feature a solid construction for greater resistance and minimal deflection upon impact.

• Available in two sizes:
  • 3 ½" D x 4 ½" H 2245
  • 3 7/8" D x 3 1/8" H 2245.1
• Maximum rubber density for highest impact applications
• Maximum Length: 10 ft.
• EPDM rubber, black

2250 Heavy-Duty Wall Guard
D-shaped bumpers feature a collapsible bulb design for maximum cushioning and impact absorption

• Available in four sizes
  • 1 ¾" x 2" 2250
  • 3" x 3" 2250.1
  • 4" x 4 ¼" 2250.2
  • 6" x 6" 2250.3
• Maximum Length: 12 ft
• Flex and rebound minimize abrupt "jarring."
• EPDM rubber, black

3010 High-Density Polyethelene (HDPE)
Wall Guard
Heavy-duty impact resistant material made from 100% post-consumer recycled plastic

• Available in two standard profiles:
  • ¾” D x 5 ½” H – 3010
  • 1 ½” D x 5 ½” H – 3020
• Easy to install—simply cut and drill
• Waterproof and chemical resistant
• For interior or exterior use
• Standard Lengths: 12 Ft.
• Ask us about additional profiles available