Cart is empty
3010 & 3020 HDPE (High-Density Polyethylene) Wallguard
Heavy duty impact resistant material made from 100% post-consumer recycled plastic. Minimum orders apply (see below).
- Easy to install—simply cut and drill with ordinary woodworking equipment
- Waterproof and chemical resistant
- For interior or exterior use
- Standard Lengths: 12 Ft.
- HDPE color chain available (see color list below as well)
- Manufacturer's Comparison
Installation: HDPE products is installed with the same tools used to work wood lumber. The product will cut and drill very cleanly, as there is no grain to split or chip. For exposed fasteners, it is not necessary to pre-drill the plastic lumber when fastening. For non-exposed fasteners, material can be drilled with a plug hole cutter, affixed to the wall and holes plugged with drilled material. Material can be beveled in the field for contoured ends. Stainless steel or coated decking nails and screws are recommended for use with HDPE products. Screws offer the best form of attachment.
Available sizes:
Series Number |
Thickness x Height |
Length |
Weight per 12' |
Minimum Qty of 12' Pieces |
Linear Feet of Minimum Qty |
| 3010.8 | 3/4" x 3-1/2" | 12' | 9.5# | 150 | 1800 |
| *3010 | 3/4" x 5-1/2" | 12' | 15# | 90 | 1080 |
| 3010.2 | 3/4" x 8" | 12' | 22.5# | 70 | 840 |
| 3010.3 | 3/4" x 9-1/2" | 12' | 26.5# | 60 | 720 |
| 3010.6 | 3/4" x 12-1/2" | 12' | 33# | 45 | 540 |
| 3010.7 | 3/4" x 18" | 12' | 50# | 40 | 480 |
| 3020 | 1-1/2" x 3-1/2" | 12' | 18.5# | 80 | 960 |
| *3020 | 1-1/2" x 5-1/2" | 12' | 29# | 56 | 672 |
| 3020.2 | 1-1/2 x 7-1/4" | 12' | 36 | 40 | 480 |
| 3020.3 | 1-1/2" x 9-1/2" | 12' | 51 | 32 | 384 |
| 3020.4 | 1-1/2" x 11-1/2" | 12' | 54 | 24 | 288 |
Call US Toll Free (877) 943-6826 E-Mail Us sales@wallguard.com Fax Us (877) 943-2926
© 2004-2012 Wallguard.com. Powered by CS-Cart - Powerful Ecommerce Solution
