2330.2 - 16 gauge - Stainless Steel Corner Guard - 1" Wings

1" Wing Stainless Steel Corner Guard with 90 Degree Angle

Type 304, 16 gauge, #4 satin finish. (Countersunk drilled will not have crimped outer edges).

90 degree (2330.2)

 Standard Lengths: 2-10 ft.

90° profile available in these standard wing sizes:

• 1" (2330.2) - if purchasing countersunk drilled wings will not be crimped
• 2" (2330.1)
• 3-1/2" (2330) or bullnose (2330.3)

135° profile

• 3-1/2" (2330.4)
• 3-1/2" bullnose (2330.5)

Endwalls (4-7/8" standard partition width, can fabricate to any width.  Please contact factory for endwall pricing).

• 3-1/2" (2330B)
• 2" (2330B.1)
• 1" (2330B.2)
•  - if purchasing countersunk drilled wings will not be crimped

Also available in custom lengths, angles and wings.

For undrilled profiles, adhesive is included for installation